IMatch 2018 Discussion Thread

Started by Mario, July 22, 2018, 01:18:21 PM

Previous topic - Next topic

Mario

Please discuss the release of IMatch 2018 here.
-- Mario
IMatch Developer
Forum Administrator
http://www.photools.com  -  Contact & Support - Follow me on 𝕏 - Like photools.com on Facebook

herman

Congratulations dear Mario!
And now time to lean back a little and sip some beer  ;)

I am not at my main PC right now, but I will download and install IM2018 when I am back later today / tonight.
Looking forward to explore all the goodies!
Enjoy!

Herman.

Jingo

Very nice Mario!!  Congrats on the release... just purchased... will download and install momentarily!  Congrats again!! - Andy.

ben

2018.7.2
Finally  ;D ;D ;D
Thanks Mario

Installation went smooth.
Database just opened well.
Viewer speed improved? Scrolling got faster again :-)

Only thing i recognized during installation:
The file size shown in the customer portal download area shows a "?" only. It does show the filesize for 2017.14.2

Ben

BanjoTom

Imatch 2018 upgrade purchased, downloaded and installed. I opened it, and it seems faster, though I haven't done any real exploration or work YET!  I'm eager to begin to use all the new features.  THANKS, Mario, for your unsurpassed dedication in developing and supporting IMatch!!!  :) :) :)
— Tom, in Lexington, Kentucky, USA

ben


Mees Dekker

#6
Same here; very good news and congratulations on this milestone.

Is it correct that it will be installed in the IMatch6 folder?

Installation worked fine, it removed the icon on my desktop for IMatch 2017 and replaced it with a new icon (Imatch 2018), but that is not true for Pack&Go. The old icon remained and had to be replaced manually.

Jingo

Installed along with new IMA version... both installed seamlessly... databases upgraded without issue.. and oh boy - IMatch opens at least 75% faster on my system now!!!  Things seem much snappier in use too... Yippee!!!  Christmas in July!!!    8)

Mario

Quote from: ben on July 22, 2018, 02:15:00 PM
Only thing i recognized during installation:
The file size shown in the customer portal download area shows a "?" only. It does show the filesize for 2017.14.2
Thanks. I've fixed that. Caused by the now only 64-bit editions.
-- Mario
IMatch Developer
Forum Administrator
http://www.photools.com  -  Contact & Support - Follow me on 𝕏 - Like photools.com on Facebook

Mario

#9
Quote from: Mees Dekker on July 22, 2018, 02:20:12 PM
Installation worked fine, it removed the icon on my desktop for IMatch 2017 and replaced it with a new icon (Imatch 2018), but that is not true for Pack&Go. The old icon remained and had to be replaced manually.

I think you may have created that icon yourself at some point.
When I remember correctly, the installer does not create an icon for Pack & Go on the desktop during installation, only for IMatch.

QuoteIs it correct that it will be installed in the IMatch6 folder?

Yes. I did not see a reason to change that. It's such a nice folder and changing it is a massive PITA - for users and me.

Did you notice the new "Scan for Changes" button in the App Translator yet? This allows you to search for all resource files with new or added app resources in one go. For a more detailed description and the diff file download, see https://www.photools.com/translating-imatch-apps-app-translator/
-- Mario
IMatch Developer
Forum Administrator
http://www.photools.com  -  Contact & Support - Follow me on 𝕏 - Like photools.com on Facebook

Mario

Quote from: Jingo on July 22, 2018, 02:23:42 PM
Installed along with new IMA version... both installed seamlessly... databases upgraded without issue.. and oh boy - IMatch opens at least 75% faster on my system now!!!  Things seem much snappier in use too... Yippee!!!  Christmas in July!!!    8)

It should open much faster for all users. The absolute snappiness experienced by the user depends on various factors, e.g. which panels are open and visible and other factors. IMatch now delays more panel updates if they are currently hidden, uses delayed updates for some other UI-related things, even the log file is faster.

I cannot really tell anymore because I'm using IMatch 2018 for so long now. But some beta testers told me the same, that their DB now loads twice or three times as fast. These are the ones with many panels open, especially 'expensive' panels like categories, some filters, collections.

The performance measures included in this release apply to many IMatch operations, not only the startup. My largest database is now 580,000 files, and it feels still fast on my system...
-- Mario
IMatch Developer
Forum Administrator
http://www.photools.com  -  Contact & Support - Follow me on 𝕏 - Like photools.com on Facebook

Mario

Quote from: ben on July 22, 2018, 02:19:56 PM
The new search!!  ;D

Yeah. I thought that users who have to search a lot will greatly enjoy the new search (options + speed).
-- Mario
IMatch Developer
Forum Administrator
http://www.photools.com  -  Contact & Support - Follow me on 𝕏 - Like photools.com on Facebook

Mario

#12
Oh, and the (virtual) price for the

First User Who Upgraded to IMatch 2018™

goes to: Jean Claude in the beautiful France.

And also to the other users who have already upgraded: Thanks!
On a Sunday! I really hope you enjoy using IMatch 2018.
And there are so many cool things coming on the new platform. Just watch the next couple of months...
-- Mario
IMatch Developer
Forum Administrator
http://www.photools.com  -  Contact & Support - Follow me on 𝕏 - Like photools.com on Facebook

thrinn

Congratulations for reaching this milestone!
Bought, dowloaded, installed it already.
I can confirm the speed improvements experienced by others.

And reading the IMatch 2018 What's new page, I discovered that I did not register all improvements even though I followed the forum discussions.

One very minor thing: In the paragraph "Access Your Batch Processor Presets from the Commands Menu" the following sentence "By pressing F9, Backspace you can now show/hide all open panels quickly." has slipped in from "Quickly Toggle All Panels with a Keyboard Shortcut".
Thorsten
Win 10 / 64, IMatch 2018, IMA

sinus

Quote from: Mario on July 22, 2018, 03:15:27 PM
Oh, and the (virtual) price for the

First User Who Upgraded to IMatch 2018™

goes to: Jean Claude in the beautiful France.

And also to the other users who have already upgraded. On a Sunday! I really hope you enjoy using IMatch 2018.
And there are so many cool things coming on the new platform. Just watch the next couple of months...

Another prize go to France - after the WM-football-cup.  ;D
Best wishes from Switzerland! :-)
Markus

Ger

IMatch is so 2018 nowadays!

Just got it, running a backup and ready to install!

Ger

Mario

Quote from: thrinn on July 22, 2018, 03:23:40 PM
One very minor thing: In the paragraph "Access Your Batch Processor Presets from the Commands Menu" the following sentence "By pressing F9, Backspace you can now show/hide all open panels quickly." has slipped in from "Quickly Toggle All Panels with a Keyboard Shortcut".
Fixed, thanks. So much text...  ;)
-- Mario
IMatch Developer
Forum Administrator
http://www.photools.com  -  Contact & Support - Follow me on 𝕏 - Like photools.com on Facebook

Mario

Quote from: Ger on July 22, 2018, 03:34:24 PM
IMatch is so 2018 nowadays!
Ger

Yeah, finally did catch up with the current year. Sigh... :D
-- Mario
IMatch Developer
Forum Administrator
http://www.photools.com  -  Contact & Support - Follow me on 𝕏 - Like photools.com on Facebook

jcldl

Yes Mario I'm just discovering Imatch 2018. Thanks to you
jcldl

jch2103

Excellent! No issues installing; now I have to explore all the new features!
John

Mario

Quote from: jch2103 on July 22, 2018, 08:23:45 PM
Excellent! No issues installing; now I have to explore all the new features!
Great. Have fun. Lots of things to check out and discover. Let me know how you experience the performance.
-- Mario
IMatch Developer
Forum Administrator
http://www.photools.com  -  Contact & Support - Follow me on 𝕏 - Like photools.com on Facebook

mastodon

Purchased and upgraded (Win7). Everything is fast and seamless. Viewer is much faster!!!! thanks!

Carlo Didier

Ordered, downloaded and installed.
Starts way faster now.

One caveat: Instead of using the email from my existing photools customer account, it instead created a new login with my paypal email (which is different).

BanjoTom

I'm starting to explore IMatch 2018, and I love the Apps "IMatch News" and the "Category Dashboard"  -- but there's SO much more, it's going to take a while to learn about all the things that will be useful for my workflow(s).   
— Tom, in Lexington, Kentucky, USA

thrinn

Quote from: Carlo Didier on July 22, 2018, 09:17:23 PM
One caveat: Instead of using the email from my existing photools customer account, it instead created a new login with my paypal email (which is different).
I had this problem multiple times when upgrading. I just change the EMail address in the IMatch Customer Portal afterwards so that all products are accessible using the same credentials.
Thorsten
Win 10 / 64, IMatch 2018, IMA

JohnZeman

Congratulations on the release Mario!
Purchased and downloaded 2018 but it will be a few days before I'll install it.  I'm pretty busy right now with other projects but I'm certainly looking forward to seeing what's new. :)

Mario

Quote from: Carlo Didier on July 22, 2018, 09:17:23 PM
One caveat: Instead of using the email from my existing photools customer account, it instead created a new login with my paypal email (which is different).

You buy the software from myCommerce / DigitialRiver. They send my system the email you have used for your purchase, and this email is used to create your log-in and license key. My systems don't have any additional knowledge about you or your email. I try to minimize the data I gather and maintain, for privacy reasons.

You can change your email to whatever you like after logging into the customer portal via the "My Data" button at the top.
The customer portal will combine all purchases and products per email.
-- Mario
IMatch Developer
Forum Administrator
http://www.photools.com  -  Contact & Support - Follow me on 𝕏 - Like photools.com on Facebook

Datameta

#27
I unfortunately could only use 2 weeks of my iMatch 2017 trial for in-depth testing (round-tripping with LR and CR, the latter's trial ended to early).

But fortunately there was enough time to follow this forum frequently. Besides all the teasers (I'm especially keen on the upcoming File Window Apps), I've realized Mario's commitment and passion on his product is outstanding.
Though I "love" LR as a developing tool and a database, Adobe's turn to the subscription policy made it clear to me what should be the central part in my tool chain in the long run: an independent state-of-the-art metadata manager!

Question: MyCommerce/Share-It still lists iMatch 2017 on the shopping card. Is this on purpose (due to the fact that the 2018 release just happened to occur on a Sunday)?


Datameta

Mario

#28
IMatch 2017 should have been deactivated/de-listed  by myCommerce / DigitialRiver by now. At least I hope so. IMatch is used in over 70 countries now, and each country has its own legal requirements and regulations....I'm still fixing loose ends everywhere...

Can you provide a link to where IMatch 2017 is still listed?
-- Mario
IMatch Developer
Forum Administrator
http://www.photools.com  -  Contact & Support - Follow me on 𝕏 - Like photools.com on Facebook

Datameta

Yes,  MyCommerce / DigitialRiver has been updated to the current product line iMatch 2018 - purchased.

Thanks for the Monday morning (:-*) feedback.

Datameta

sinus

Today bought and successfully downloaded two (2) licences.
I want to reward Mario for his work and, above all, for his super support.

Install I will do a bit later, because I have a lot other things to do.
But I am sure, IM 2018 will be very good.  :D
Best wishes from Switzerland! :-)
Markus

Mario

Quote from: sinus on July 23, 2018, 02:48:14 PM
Today bought and successfully downloaded two (2) licences.
I want to reward Mario for his work and, above all, for his super support.

Install I will do a bit later, because I have a lot other things to do.
But I am sure, IM 2018 will be very good.  :D

Thanks for your business.
And yes, IMatch 2018 is really good.

Two bugs have been reported so far, and one is fixed already.
As soon as I have fixed the other and am done with all the background operations I will ship release 2018.7.4. This will then also allow users to test the new Updater App  :)
-- Mario
IMatch Developer
Forum Administrator
http://www.photools.com  -  Contact & Support - Follow me on 𝕏 - Like photools.com on Facebook

zematima

Hi:
Just bought and installed. No problems at all unless a lot to translate ...
Anyway, I found something that should have something inside.
When I click View / App Views I only see a blanck square with nothing inside.
Please see the picture in the attachments.
Thanks,
JRosa

thrinn

QuoteWhen I click View / App Views I only see a blanck square with nothing inside.
I suspect this is intended as the new file windows app concept seems still under development.
Thorsten
Win 10 / 64, IMatch 2018, IMA

zematima


Mario

#35
There are no app views (yet), but I decided to let the menu command in place - as a sort of teaser  ;)

My first priority is yet to get

a) all the administrative and service stuff done,
b) fix the bugs which will inevitably found and
c) complete and ship IMatch Anywhere 2018.

Then I will have time to finish one or two new file window types (cool stuff!) and the first new View type - all implemented as apps.

This is how the 1st App View currently looks like:

-- Mario
IMatch Developer
Forum Administrator
http://www.photools.com  -  Contact & Support - Follow me on 𝕏 - Like photools.com on Facebook

BanjoTom

A map bug in IMatch 2018?

I've tried (with various map views: Google Street, OpenStreet, etc.) to set an image to a defined location, but even though I click to "Apply Location Coordinates to Selected Files," nothing seems to happen, and no "globe" icon shows up on the thumbnail and no data is written into the location metadata fields.

I did save a Debug log file, and can submit it if that might help. 
— Tom, in Lexington, Kentucky, USA

Mario

No problems here with that.

Do you have automatic reverse geo-coding enabled under Edit > Preferences > Geo & Maps. If so, which service do you use and are your credentials OK?
For a test, disable automatic reverse geocoding and then retry to set the coordinates.
-- Mario
IMatch Developer
Forum Administrator
http://www.photools.com  -  Contact & Support - Follow me on 𝕏 - Like photools.com on Facebook

BanjoTom

I did have automatic reverse geo-coding enabled, but after disabling it, the problem persists: I cannot map or locate a photo into an existing location.

This problem occurs whether I use Google Maps OR OpenStreet maps.  I went to Google Maps and -- though it was somewhat confusing -- set up an API for use.  I closed and reopened IMatch 2018, and tried again, with both OpenStreet maps and with Google Street maps.  NOTHING worked, so I can no longer use the map panel to assign coordinates or location to any image.  Tried with several different images at several different predefined locations.  NO SUCCESS.


— Tom, in Lexington, Kentucky, USA

Mario

Any warnings or errors reported in the log file?

Did you try to restart your PC once? Just in case?


Also, open "C:\ProgramData\photools.com\IMatch6" in Windows Explorer and delete the "browser" sub-folder while IMatch is not running.
-- Mario
IMatch Developer
Forum Administrator
http://www.photools.com  -  Contact & Support - Follow me on 𝕏 - Like photools.com on Facebook

BanjoTom

You recommended:

1.  Any warnings or errors reported in the log file?
Two errors shown:
  16:49:01+   16 [3180] 00  E>               ...  'v:\develop\imatch5\src\imengine\ptmetabase2.cpp(3085)'
  16:51:42+   15 [3180] 00  E>                 ...  'v:\develop\imatch5\src\imengine\ptmetabase2.cpp(3085)'


2. Did you try to restart your PC once? Just in case?
Yes, restarted. 

3. Also, open "C:\ProgramData\photools.com\IMatch6" in Windows Explorer and delete the "browser" sub-folder while IMatch is not running.
Done.

Still don't have this functionality.  Cannot use map panel to set GPS latitude and longitude for any file using my locations. 

Other ideas?  Or should I send you a complete debug log file?

— Tom, in Lexington, Kentucky, USA

Mario

Please attach an IMatch log file from a session where you tried to assign GPS coordinates to an image via the Map Panel.
If there is something wrong, IMatch should log something...

I've just tried with OSM and Google Maps. No problem assigning the target marker coordinates to images. So it should work on your system also. No idea, sorry.
-- Mario
IMatch Developer
Forum Administrator
http://www.photools.com  -  Contact & Support - Follow me on 𝕏 - Like photools.com on Facebook

BanjoTom

Here's an attached log file from a  little earlier today, when I was trying to use the Map panel to assign GPS and location coordinates to an image or two. . .  Thanks for any guidance you can offer . . . and no big hurry -- in the meantime I can copy GPS and location data from files  to which it  was previously loaded using earlier versions of IMatch...
— Tom, in Lexington, Kentucky, USA

Mario

Just in case: Can you send me (or attach) one of the images which cause this behavior?
-- Mario
IMatch Developer
Forum Administrator
http://www.photools.com  -  Contact & Support - Follow me on 𝕏 - Like photools.com on Facebook

BanjoTom

Here (attached) is another log file, plus one of the many images for which I tried to use the map panel to assign it to an existing  location. 
— Tom, in Lexington, Kentucky, USA

BanjoTom

I've tested this problem some more, and found that I can set a map location for a photo file using the Target Marker, but  trying to use an existing named LOCATION in my list of locations still doesn't work.  And when I use the Target Marker, it only saves the GPS latitude and longitude data, and -- understandably -- doesn't populate the LOCATION fields in my metadata. 

While doing this test, I've used a completely different image file and saved a new Debugging Level Log File.  Both are attached. . .

Hope this helps.

— Tom, in Lexington, Kentucky, USA

Mario

Quotetrying to use an existing named LOCATION

Ah, that's important. You are trying to set coordinates from a previously stored location.

Because in your log file (somewhere above, we really should have created a proper bug report for this, not mixing it into the general "IMatch 2018 is here" thread) IMatch reports problems loading stored locations from the database.

When you look at your stored locations in the Map Panel, do they look OK?
Are they filled correctly? Maybe make a change so they are stored again in the database. Then retry.
Keep / attach the log file from that session.

If the problem persists, I would need your database here. Or at least I would need to send you instructions on how to extract the settings from your database file so I can look at them here. Maybe something is broken in the stored locations...
-- Mario
IMatch Developer
Forum Administrator
http://www.photools.com  -  Contact & Support - Follow me on 𝕏 - Like photools.com on Facebook

Mario

#47
@BanjoTom

I have added a bug report on your behalf https://www.photools.com/community/index.php?topic=8119

I have found a bug with applying locations in the Map Panel. The problem was that IMWS did not state correctly which coordinate pair was to set from the location and hence nothing happened.
Fixed for the next release.


@Reminder to all: If you think you have found a bug, please open a bug report. If its not a bug, we can just close the bug report. No worries.
Discussing a bug in the same thread that discusses general "IMatch 2018 is there" topics makes it very hard to track or to keep everything together.
-- Mario
IMatch Developer
Forum Administrator
http://www.photools.com  -  Contact & Support - Follow me on 𝕏 - Like photools.com on Facebook

BanjoTom

Quote@Reminder to all: If you think you have found a bug, please open a bug report. If its not a bug, we can just close the bug report. No worries.
Discussing a bug in the same thread that discusses general "IMatch 2018 is there" topics makes it very hard to track or to keep everything together.
My apologies for that!  When I first noticed the mapping issue, I thought it was something simple that deserved a mention in the "general" discussion of the newly-released IMatch 2018.  After my first attempts at resolving it failed, I should have continued my communications as a Bug Report. 

Glad to hear that it's not an issue I caused, and once again, it's Mario to the rescue! More evidence of Photools unsurpassed support!
— Tom, in Lexington, Kentucky, USA

Mario

There is still the error message in your log files about IMatch having problems loading one or more locations from the database.
Did you check that your locations are visible in the map panel? Is so, maybe changing them slightly to force a re-save may solve the problem and the error report should be gone when you close and restart IMatch.
-- Mario
IMatch Developer
Forum Administrator
http://www.photools.com  -  Contact & Support - Follow me on 𝕏 - Like photools.com on Facebook